Loading... Please wait...

Serial RS232/422/485 and GPI Fiber Transceivers (Pair) - 10km (OBD 1510 D)

  • RS232/422/485 Serial and GPI Bidirectional Fiber Transceiver (Model: OBD 1510 D)
RRP:
$1,399.00
Your Price:
$1,329.05 (You save $69.95)
SKU:
4250479319103
Weight:
4.00 LBS
Availability:
In Stock
Shipping:
Free Shipping
 
 
 
 
Quantity:


Product Description

The OBD 1510 D is a pair of multi-function modules which will extend the reach of serial RS232, RS422 or RS485 as well as two GPI (general purpose interface) up to 10km (6.2 miles) over a single bidirectional fiber link (WDM)

 

Features

  • Bidirectional - send and receive over single fiber link
  • Extend serial and GPI connections up to 10km
  • Supports serial RS232 or RS422 or RS485
  • 2 x GPI connections
  • Singlemode fiber up to 10km (6.2 miles)
  • LC/PC duplex fiber connections
  • Switchable RX/TX crossover
  • Automatic or manual data direction
  • Switchable end of line termination
  • ‘Plug and Play’ - No PC software drivers needed
  • Supports all serial protocols (standard or proprietary)
  • 300 - 460K Baud (auto sensing and auto adjusting)
  • Hot swappable, hot pluggable

 

The OBD 1510 D is a pair of multi-function modules which will extend the reach of serial RS232, RS422 or RS485 as well as two GPI (general purpose interface) up to 10km (6.2 miles) over a single bidirectional fiber link (WDM)

A single RJ45 electrical serial connection can be configured for RS232,RS422 or RS485 serial standards. A separate RJ45 connector is provided for two electrical GPI inputs and outputs. Serial communications and GPI are transmitted and extended over the same fiber link.

The OBD 1510 D is completely agnostic to the serial protocol used, and supports all standard protocols and proprietary protocols at data rates from 300 to 460K Baud (auto sensing and auto adjusting).

The integrated dip switch provides precise control over the serial mode of operation with selections for the serial standard, serial termination, RX/TX crossover and RS422/485 data direction (automatic or manual). Data activity LEDs are provided for the serial port and the GPI port under the respective RJ45 connectors.

The OBD 1510 D also supports mixing and matching of serial standards. For example: the transmitting module can have a RS232 input, and the receiving module can be set for RS422 output.

The OBD 1510 D is 100% plug and play, hot pluggable and no special software drivers are required.

 

Ordering Information

yellobrik-case.jpg

OBD 1510 D - RS232/422/485 Serial and GPI Bidirectional Fiber Transceiver

 

 

 

 

 

Includes:

  • 2 x OBD 1510 D (type A and type B) Modules
  • 2 x Power Supplies
  • 2 Sets Mounting Brackets
  • Plastic Transport Case
  • 3 year warranty

lc-st-sim.jpgOPTIONS:
 
LC/ST SIM:
LC Connector to ST Connector Adapter Kit.

This option allows the use of an ST fiber connection to the OBD 1510 D and includes a 0.5m (19.6") tail (SMF) and 1 x ST/ST sex changer adapter. Adapter cable introduces less than 0.25dB attenuation.
(Note: One needed for each module - order second option here

lc-sc-sim.jpgLC/SC SIM:
LC Connector to SC Connector Adapter Kit.

This option allows the use of an SC fiber connection to the OBD 1810 and includes a 0.5m (19.6") tail (SMF). Adapter cable introduces less than 0.25dB attenuation.
(Note: One needed for each module - order second option here)

ptap1000-thumb-03.jpgP-TAP 1000: P-TAP Battery Adapter Cable

This option allows the yellobrik to be powered from a battery with a standard P-TAP power connection. Cable length 1.8m

 

xlr1000-thumb-03.jpgXLR-1000: 4 Pin XLR Camera Battery Adapter Cable

This option allows the yellobrik to be powered from a camera battery with a standard 4 pin XLR power connection. Cable length 1.8m

 

DOWNLOADS

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!



Our Newsletter

Visa Mastercard Paypal